SPRAY EQUIPMENT REQUIREMENTS
The Spectra Chrome finish consists of three layers – basecoat, metal spray, and topcoat. The basecoat and topcoat layers are polyurethane-based paints, which are applied using an HVLP spray gun and a compressed air source.
Your LI System includes the CENTRAL PNEUMATIC 20 oz. HVLP gravity-feed spray gun from Harbor Freight in the box. However, it is completely fine to use an HVLP spray gun that you already own.
You may already own an air compressor that is well suited for this process. However, if you do not have an air compressor, we recommend the MCGRAW 8 Gallon, 150 PSI Air Compressor from Harbor Freight.
Keep in mind, it is never a bad idea to go larger. A compressor with a higher CFM rating and bigger tank capacity will be helpful if you plan to spray a lot of parts at one time. Also, if you plan to use an air sander or other pneumatic tools with your compressor, additional CFM will be required.
It is extremely important to filter and remove all moisture from your compressed air source to prevent moisture from building up in the air lines and negatively affecting your finish. The next section will explain how to set up the air filtration system included with your LI System.
